Star dischargers are widely used in many industries. Ruian Tianlan environmental protection Co., Ltd. is a manufacturer of R & D and production of dischargers and star dischargers. Today, Tianlan Xiaobian will tell you about the common faults of star dischargers and some solutions

1. Sometimes, the tension of the star discharger is insufficient, or the star discharger slips. The solution: we can adjust the tension device to make it more tense, so that the whole system can run more perfectly.

2. When the star type ash discharge valve is overloaded, the resistance torque will gradually increase, which will easily lead to the sliding of the belt of the star type ash discharge device. The solution is to reduce the amount of materials to be fed, and try to ensure that the materials are fed more evenly. If the reduction of the amount of feeding can not be improved, we should see if the star type ash discharge device is stuck .

3. The friction between the head wheel and the star unloader belt is too little. If it is too smooth, the star unloader belt is easy to slip. The solution: you can apply a layer of glue on the surface, which can greatly improve the friction. It is also very helpful. If the bearing of the head wheel or the bottom wheel is used for a long time, the rotation will not be flexible. At this time, the friction will be reduced The torque will gradually increase, and it will be better to disassemble and add some oil to improve the lubrication or replace the bearing; and we should also control the feeding amount when the feeding of star unloader is uneven.

Understand some common problems of star discharger, star discharger can work better. I hope the above will help you.